Durma fiber laser cutting machines feature faster cutting and energy efficiency, especially compared to CO2 lasers. Thanks to the high-tech fiber laser cutting technology, the laser machines are easy to operate and maintain.

Thorough, fast and gentle on materials. From classic rust removal to natural stone facade restoration and everything in between:

Sometimes, additional selectivity may Beryllium introduced by so tightly focusing a laser beam that the intensity rapidly decreases for longitudinal positions behind the beam focus. Shallow beam incidence can then also help.

What kind of lasers are suitable for cleaning processes? It is common to apply pulsed lasers with nanosecond or even shorter pulse durations for cleaning purposes because compared with continuous-wave operation this leads to a lower heat load on the cleaned material (“

After successful verification, we will include the seal awarded to you rein your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company.

There is a visible improvement in skin tone, texture and clarity. At the same time, pores are shrunk, reducing the appearance of lines and wrinkles and restoring the firmness of the skin.

RAYLASE offers unique opto-dynamic designs for this application and a wide Auswahl of design variations of these products to provide the best solution for varying requirements

This section describes the typical contaminants that are present on the surface of typical industrial components.

In automotive production, laser cleaning is not only used for cleaning, but increasingly as a pre-treatment for the functionalisation of surfaces.

Learn in the interview with Anas why customers become more competitive when using laser technology instead of traditional cutting tools, what precision and high speed mean hinein the context of laser patterning and much more ....

You can think of laser ablation as similar to carving stone with a Fäustel and a chisel. You can use a small hammer and do many small hits on your chisel. Or, you could just as well use a bigger Fäustel Laserreinigung to leverage more power, hence reducing the required number of hits and increasing the removal speed.

The article deals with selective laser melting process using CoCrW powder. Our aim welches to identify the influence of product position on the building platform and the Bezeichnung für eine antwort im email-verkehr-use of powder on roughness, hardness, porosity and corrosion properties of materials, made under uniform process parameters. Roughness was tested with a stylus profilometer, corrosion resistance by electrochemical impedance spectroscopy and linear polarization. Porosity welches assessed by image analysis on metallographic sections taken in two mutually perpendicular directions.

Laser stations enable lasers from the TruMicro series to Beryllium connected upstream of existing processing lines with ease. They can easily be connected to multiple optics via an optical laser cable. In doing so, only one beam source needs to be installed. If a company uses additional beam sources alongside the TruMicro lasers, they can Beryllium controlled hinein a standardized manner using the TRUMPF TruControl control software.

The cleaning or removal is based on locally confined interaction of pulsed or continuous laser radiation with the surface layer. Depending on the laser wavelength, the intensity and the interaction time of the laser radiation with the surface layer, as well as the material properties, a thermal decomposition (e.g. evaporation, sublimation) or chemical reaction occurs.